Brent · England
Gas Safety Certificate (CP12) in Brent
From enquiry to certificate: Gas Safety Certificate (CP12) for landlords in Brent, handled by professionals holding the registration the law requires, with pricing confirmed before you commit.
Straight answer
If you let a property with gas appliances in Brent, the law requires a gas safety check every 12 months, carried out by a Gas Safe registered engineer. The record it produces — the CP12 — goes to your current tenants within 28 days, and to new tenants before they move in.
Booking
From enquiry to certificate
Our network doesn't yet show confirmed availability in Brent. Rather than guess, tell us what the property needs and we'll come back with a real answer — coverage, timing and price — before you decide anything.
Letting property in Brent
Letting in Brent: the practical points
For landlords in Brent, the practical points are the universal ones: annual check, Gas Safe engineer, tenant copies on time. Keep the record where you can produce it quickly — for your agent, your insurer, or London Borough of Brent if the property is licensed or ever inspected. Certificates that can't be found cause almost as much trouble as certificates that were never done.
Pricing
What a CP12 costs
CP12 pricing is driven by time on site: how many appliances there are, how accessible they are, and whether you combine the check with a boiler service while the engineer is there. Distance and short-notice bookings can add to it. Treat the range shown as guidance for budgeting; the actual price is confirmed up front, not after the visit.
Paperwork
Copies, retention and the renewal window
Treat the CP12 like an MOT: renew it in the two months before it lapses and the expiry date carries forward as if you'd waited. Copies are a legal duty, not a courtesy — 28 days for sitting tenants, before move-in for incoming ones — and the record should stay in your file for at least two years, ideally alongside its predecessors as a maintenance history.
Credentials
Who you're letting in
Gas work is one of the few trades where the register isn't optional: an engineer who isn't Gas Safe registered can't legally sign your record, full stop. We check registration and insurance before confirming any booking, and you can verify any engineer yourself on the public Gas Safe Register — ask to see the ID card, and check the back for the work categories it covers.
The law
Your legal duty, in plain English
Annual gas checks aren't a licensing nicety — they sit in the Gas Safety (Installation and Use) Regulations 1998, enforced by the HSE rather than by London Borough of Brent. Prosecution can bring unlimited fines and, in serious cases, custody. Housing enforcement is where the council does come in: as Brent's housing authority it can act on unsafe conditions, and any HMO licence it issues will expect the current record on file.
Landlords must have every gas appliance and flue they provide checked by a Gas Safe registered engineer at least every 12 months, keep the record for two years, give tenants a copy within 28 days of the check, and give new tenants a copy before they move in.
Equivalent annual duty applies in Northern Ireland; engineers must be Gas Safe registered.
Penalties stated are statutory maximums or court-set; London Borough of Brent is the local housing authority for Brent.
The inspection
What the engineer actually checks
Expect the visit to run appliance by appliance. Tightness testing at the meter comes first, ruling out leaks anywhere in the pipework. Each appliance is then fired up and tested — burner pressure or heat input, safety devices, stability, ventilation to the room — and each flue is checked for pull and termination. Defects are graded by how dangerous they are, and only a Gas Safe registered engineer's signature makes the resulting record valid.
FAQ
What Brent landlords ask us
How long does a gas safety check take?
Typically around 30 to 60 minutes for a property with a boiler and one or two additional gas appliances. More appliances, or access issues, extend the visit.
Is a gas safety check the same as a boiler service?
No. The safety check confirms appliances are safe to use; a service is a maintenance clean and inspection of the boiler itself. Many landlords in Brent book both together because the engineer is already on site, but only the safety check is a legal requirement.
My Brent property has no gas supply — do I still need a CP12?
No. If the property has no gas supply or gas appliances, the gas safety regulations do not apply. If the supply is merely capped but a live meter remains, taking professional advice is sensible before assuming you are exempt.
Do tenants' own gas appliances need to be on my record?
Appliances owned by the tenant are not the landlord's responsibility to check, but the pipework serving them is, and any flue serving a tenant appliance that you own must be included. Note the division of responsibility in your tenancy agreement.
Who can carry out a gas safety check in Brent?
Only an engineer on the Gas Safe Register may legally carry out landlord gas safety checks anywhere in the UK, including Brent. Always ask to see the engineer's Gas Safe ID card — you can verify it on the official register.
How long must I keep gas safety records?
Keep each record for at least two years. Because defects and history can matter in disputes, many landlords keep the full chain of records for the life of the tenancy — digital copies are fine.
Nearby
Nearby coverage: Harrow · Ealing · Barnet · Camden · all of London
Tell us the postcode and what needs certifying; we'll handle the rest and keep the renewal on our calendar, not just yours. Check availability in Brent
Sorting your Gas Safety Certificate (CP12) in Brent?
Tell us the property and we'll confirm coverage and price by email before anything is committed.