Get a quote

Telford · England

Smoke & CO Alarm Check in Telford

From enquiry to certificate: Smoke & CO Alarm Check for landlords in Telford, handled by professionals holding the registration the law requires, with pricing confirmed before you commit.

Start your booking

Straight answer

The check is simple by design: presence, position, power, function, expiry — alarm by alarm — recorded with dates and locations. It's how landlords in Telford evidence England's tenancy-start requirement, Scotland's interlinked standard, or Wales's mains-interlinked rule, depending on where the property sits.

Booking

What happens when you enquire

Live booking isn't switched on for Telford yet — vetting comes before listing, in that order. Leave your details and you'll get a straight answer by email: whether we can cover the property, when, and for how much. No obligation either way.

Check availability & pricing

Guidance only — not a quote. Final price confirmed before any booking.

Letting property in Telford

Letting in Telford: the practical points

The applicable rulebook follows the property's nation, not its town — so for Telford the job is knowing which regime you're in and evidencing it. The local layer is Telford & Wrekin Council: England-side penalties run through the council, and HMO licences typically specify higher-grade interlinked systems with heat detection in kitchens.

Pricing

What an alarm check costs

Guidance range
£40–£75
per visit (alarms extra if supplied). Guidance only — not a quote. Final price confirmed before any booking.
Time on site
Usually 15–30 minutes to survey, test and record; longer if alarms need installing.
Renewal
Checked working at the start of every tenancy; test regularly during the tenancy
In England the statutory check point is the first day of a new tenancy. During a tenancy, routine testing is typically down to the tenant, but the landlord must fix faulty alarms once reported — and alarms themselves have manufacturer expiry dates worth tracking.

A standalone alarm check is one of the smallest tickets in compliance, which is why it's usually bundled: it rides along with a gas visit, an inventory or an EICR for little more than the time it adds. The range shown covers a dedicated visit; replacement units, if needed, are parts on top — sealed long-life alarms cost more upfront and less over a decade.

The inspection

What the check actually covers

The visit works alarm by alarm: is it the right type for the location (smoke in circulation spaces, heat where Scotland's kitchen rule applies, CO by combustion appliances), is it positioned per the manufacturer's siting instructions, does the test button fire it, and what does the printed expiry date say? Interlink function is checked where systems require it, and everything is logged with locations and dates.

The law

What the law asks of landlords in Telford

In England, the smoke and carbon monoxide alarm regulations require a smoke alarm on every storey used as living accommodation and a CO alarm in any room with a fixed combustion appliance other than a gas cooker; landlords must ensure alarms work at the start of each tenancy and must repair or replace promptly once told of a fault. Telford & Wrekin Council can require remedial action and fine up to £5,000 per breach. Scotland, Wales and NI apply their own regimes — interlinked standards in Scotland, mains-interlinked in Welsh rentals, fitness and HMO standards in NI.

England
Smoke and Carbon Monoxide Alarm (England) Regulations 2015, as amended 2022
Landlords must fit at least one smoke alarm on every storey used as living accommodation, a carbon monoxide alarm in any room with a fixed combustion appliance (gas cookers excluded), ensure alarms work at the start of each tenancy, and repair or replace faulty alarms when told about them.
Scotland
Tolerable Standard (Housing (Scotland) Act 1987, as amended)
Homes must have interlinked smoke alarms (living room and circulation spaces), an interlinked heat alarm in the kitchen, and CO detection where there is a carbon-fuelled appliance.
Wales
Renting Homes (Wales) Act 2022 and fitness regulations
Rented dwellings must have mains-powered, interlinked smoke alarms on each storey and carbon monoxide alarms where required.
Northern Ireland
Private Tenancies Act (Northern Ireland) 2022 and associated regulations
Smoke, heat and carbon monoxide alarm requirements apply to private tenancies in Northern Ireland.

Penalties stated are statutory maximums or court-set; Telford & Wrekin Council is the local housing authority for Telford.

Credentials

Who you're letting in

The value is in the record, so that's what we vet for: per-alarm results with locations, dates and expiry readings, photographed where useful. Anyone can press a button; documenting the whole set of alarms against the right nation's rules is the competent version of the job.

FAQ

Smoke & CO Alarm Check questions, answered

Which appliances trigger the CO alarm requirement?

In England, any fixed combustion appliance — gas boilers, gas fires, log burners, oil appliances — except gas cookers. Rooms with only a gas cooker don't require one by law there, though fitting one anyway is inexpensive good practice.

Where should alarms be positioned?

Smoke alarms on ceilings in circulation spaces such as hallways and landings on each storey; CO alarms at head height in rooms containing the appliance, following the manufacturer's siting instructions. Avoid dead corners and locations right next to kitchens or bathrooms where nuisance triggering is likely.

How often should alarms be tested?

The landlord must evidence working alarms at the start of each tenancy in England; regular testing during the tenancy is typically the tenant's day-to-day role, with the landlord responsible for repair or replacement when told of a fault. Recording a test at each visit is good practice.

What records should I keep?

Dated confirmation that alarms were tested working at tenancy start (commonly in the inventory with photographs), locations and types of each alarm, expiry dates, and notes of any repairs or replacements — quick evidence if Telford & Wrekin Council ever asks.

How long does an alarm check take?

Usually 15 to 30 minutes for a typical property — checking presence, position, expiry dates and test-button function per alarm, then recording the results. It combines naturally with inventory, gas or electrical visits.

Nearby

Nearby coverage: Shrewsbury · Wolverhampton · Stafford · all of Herefordshire & Shropshire

Tell us the postcode and what needs certifying; we'll handle the rest and keep the renewal on our calendar, not just yours. Get availability by email

Sorting your Smoke & CO Alarm Check in Telford?

Tell us the property and we'll confirm coverage and price by email before anything is committed.

Register interest

Register interest — Smoke & CO Alarm Check