Lewes · England
Smoke & CO Alarm Check in Lewes
Book your Smoke & CO Alarm Check in Lewes with a vetted professional — clear pricing guidance, certificates delivered digitally, renewal reminders included.
Straight answer
The check is simple by design: presence, position, power, function, expiry — alarm by alarm — recorded with dates and locations. It's how landlords in Lewes evidence England's tenancy-start requirement, Scotland's interlinked standard, or Wales's mains-interlinked rule, depending on where the property sits.
Booking
What happens when you enquire
Our network doesn't yet show confirmed availability in Lewes. Rather than guess, tell us what the property needs and we'll come back with a real answer — coverage, timing and price — before you decide anything.
The inspection
What the check actually covers
Expect 15 to 30 minutes in a typical property. The checker maps what's installed against what your nation requires, presses every test button, checks mounting and siting (ceilings for smoke, head height for CO), reads expiry dates, and flags units due for replacement. The output is a dated record you can attach to the inventory.
Credentials
Who you're letting in
Be wary of two extremes: drive-by checks that test nothing but the hallway unit's button, and scare-led upsells replacing serviceable alarms years early. We book checkers who record what's actually there, replace what's actually due, and leave evidence you can hand to Lewes District Council or an inventory clerk.
Pricing
What an alarm check costs
Treat the check as insurance-priced: small, regular, and cheap next to England's up-to-£5,000 penalty or a void inventory dispute. Combining it with another visit to the property is almost always the economical route, and we'll say so rather than sell a standalone callout you don't need.
For landlords in Lewes
Letting in Lewes: the practical points
For Lewes landlords the practical calendar is: full check at every tenancy change, function confirmation at routine visits, and replacement on expiry rather than failure. Tenants handle day-to-day testing and must report faults; your duty is prompt repair or replacement once they do.
The law
Why Smoke & CO Alarm Check matters for Lewes landlords
Legally the tenancy-start moment matters most in England: alarms must be shown working when the tenancy begins — dated inventory photographs are the standard evidence — and the in-tenancy duty is repair or replacement once a fault is reported. Elsewhere the duty is continuous by design: Scotland's and Wales's interlinked systems are property standards, not tenancy events.
Landlords must fit at least one smoke alarm on every storey used as living accommodation, a carbon monoxide alarm in any room with a fixed combustion appliance (gas cookers excluded), ensure alarms work at the start of each tenancy, and repair or replace faulty alarms when told about them.
Homes must have interlinked smoke alarms (living room and circulation spaces), an interlinked heat alarm in the kitchen, and CO detection where there is a carbon-fuelled appliance.
Rented dwellings must have mains-powered, interlinked smoke alarms on each storey and carbon monoxide alarms where required.
Smoke, heat and carbon monoxide alarm requirements apply to private tenancies in Northern Ireland.
Penalties stated are statutory maximums or court-set; Lewes District Council is the local housing authority for Lewes.
FAQ
What Lewes landlords ask us
Do alarms expire?
Yes — most smoke and CO alarms have a manufacturer service life of around 10 years (CO sensors sometimes less), printed on the unit. Replacement by the expiry date matters as sensors degrade even if the test button still sounds.
Which appliances trigger the CO alarm requirement?
In England, any fixed combustion appliance — gas boilers, gas fires, log burners, oil appliances — except gas cookers. Rooms with only a gas cooker don't require one by law there, though fitting one anyway is inexpensive good practice.
Are alarm standards higher for HMOs in Lewes?
Usually — HMO licensing from Lewes District Council commonly specifies mains-powered, interlinked systems with heat detection in kitchens, at a higher grade than single-let minimums. Your licence conditions and fire risk assessment define the specification.
What are the tenant's responsibilities for alarms?
Routine testing during the tenancy, not removing batteries or units, and reporting faults promptly. The landlord's duty to repair or replace is triggered when the fault is reported.
How long does an alarm check take?
Usually 15 to 30 minutes for a typical property — checking presence, position, expiry dates and test-button function per alarm, then recording the results. It combines naturally with inventory, gas or electrical visits.
Nearby
Also serving landlords in: Brighton & Hove · Eastbourne · Haywards Heath · all of Sussex
Tell us the postcode and what needs certifying; we'll handle the rest and keep the renewal on our calendar, not just yours. Tell us about the property
Sorting your Smoke & CO Alarm Check in Lewes?
Tell us the property and we'll confirm coverage and price by email before anything is committed.