Get a quote

Kensington and Chelsea · England

Smoke & CO Alarm Check in Kensington and Chelsea

From enquiry to certificate: Smoke & CO Alarm Check for landlords in Kensington and Chelsea, handled by professionals holding the registration the law requires, with pricing confirmed before you commit.

Start your booking

Straight answer

The check is simple by design: presence, position, power, function, expiry — alarm by alarm — recorded with dates and locations. It's how landlords in Kensington and Chelsea evidence England's tenancy-start requirement, Scotland's interlinked standard, or Wales's mains-interlinked rule, depending on where the property sits.

Booking

How it works

We're building coverage in Kensington and Chelsea through our national onboarding programme, and we won't pretend otherwise with a fake availability calendar. Send the property details and we'll confirm by email whether we can cover the job, and the price, before anything is committed.

Check availability & pricing

Guidance only — not a quote. Final price confirmed before any booking.

Pricing

What an alarm check costs

Guidance range
£40–£75
per visit (alarms extra if supplied). Guidance only — not a quote. Final price confirmed before any booking.
Time on site
Usually 15–30 minutes to survey, test and record; longer if alarms need installing.
Renewal
Checked working at the start of every tenancy; test regularly during the tenancy
In England the statutory check point is the first day of a new tenancy. During a tenancy, routine testing is typically down to the tenant, but the landlord must fix faulty alarms once reported — and alarms themselves have manufacturer expiry dates worth tracking.

A standalone alarm check is one of the smallest tickets in compliance, which is why it's usually bundled: it rides along with a gas visit, an inventory or an EICR for little more than the time it adds. The range shown covers a dedicated visit; replacement units, if needed, are parts on top — sealed long-life alarms cost more upfront and less over a decade.

The law

The rules behind the certificate

Legally the tenancy-start moment matters most in England: alarms must be shown working when the tenancy begins — dated inventory photographs are the standard evidence — and the in-tenancy duty is repair or replacement once a fault is reported. Elsewhere the duty is continuous by design: Scotland's and Wales's interlinked systems are property standards, not tenancy events.

England
Smoke and Carbon Monoxide Alarm (England) Regulations 2015, as amended 2022
Landlords must fit at least one smoke alarm on every storey used as living accommodation, a carbon monoxide alarm in any room with a fixed combustion appliance (gas cookers excluded), ensure alarms work at the start of each tenancy, and repair or replace faulty alarms when told about them.
Scotland
Tolerable Standard (Housing (Scotland) Act 1987, as amended)
Homes must have interlinked smoke alarms (living room and circulation spaces), an interlinked heat alarm in the kitchen, and CO detection where there is a carbon-fuelled appliance.
Wales
Renting Homes (Wales) Act 2022 and fitness regulations
Rented dwellings must have mains-powered, interlinked smoke alarms on each storey and carbon monoxide alarms where required.
Northern Ireland
Private Tenancies Act (Northern Ireland) 2022 and associated regulations
Smoke, heat and carbon monoxide alarm requirements apply to private tenancies in Northern Ireland.

Penalties stated are statutory maximums or court-set; Royal Borough of Kensington and Chelsea is the local housing authority for Kensington and Chelsea.

Paperwork

Schedules, expiry dates and tenancy-start proof

The tenancy-start record is the crown jewel in England: dated confirmation — ideally photographs in the inventory — that every required alarm was tested working on day one. Keep alongside it the map of what's installed (type, location, expiry) and notes of any repair or replacement, which evidences the in-tenancy duty too.

The inspection

What the check actually covers

The visit works alarm by alarm: is it the right type for the location (smoke in circulation spaces, heat where Scotland's kitchen rule applies, CO by combustion appliances), is it positioned per the manufacturer's siting instructions, does the test button fire it, and what does the printed expiry date say? Interlink function is checked where systems require it, and everything is logged with locations and dates.

Renting out in Kensington and Chelsea

Letting in Kensington and Chelsea: the practical points

Wherever the property sits in Kensington and Chelsea, alarm compliance is the item inspectors, agents and Royal Borough of Kensington and Chelsea can verify fastest — a glance at the ceiling and a button press. It's also the duty tenants notice. Keeping the schedule current is cheap credibility with everyone who looks.

Credentials

Who you're letting in

The value is in the record, so that's what we vet for: per-alarm results with locations, dates and expiry readings, photographed where useful. Anyone can press a button; documenting the whole set of alarms against the right nation's rules is the competent version of the job.

FAQ

Common questions about the Alarm compliance check record

Where should alarms be positioned?

Smoke alarms on ceilings in circulation spaces such as hallways and landings on each storey; CO alarms at head height in rooms containing the appliance, following the manufacturer's siting instructions. Avoid dead corners and locations right next to kitchens or bathrooms where nuisance triggering is likely.

What are the tenant's responsibilities for alarms?

Routine testing during the tenancy, not removing batteries or units, and reporting faults promptly. The landlord's duty to repair or replace is triggered when the fault is reported.

Battery or mains-powered alarms — which do I need?

England's regulations don't mandate the power type for existing rentals, though sealed long-life batteries or mains power are recommended. Scotland requires sealed long-life battery or mains interlinked alarms; Wales requires mains-powered interlinked smoke alarms in rentals. Building regulations set standards for new work.

Which appliances trigger the CO alarm requirement?

In England, any fixed combustion appliance — gas boilers, gas fires, log burners, oil appliances — except gas cookers. Rooms with only a gas cooker don't require one by law there, though fitting one anyway is inexpensive good practice.

Are alarm standards higher for HMOs in Kensington and Chelsea?

Usually — HMO licensing from Royal Borough of Kensington and Chelsea commonly specifies mains-powered, interlinked systems with heat detection in kitchens, at a higher grade than single-let minimums. Your licence conditions and fire risk assessment define the specification.

What does a smoke and CO alarm check involve?

Confirming the right alarms are present in the right locations for your nation's rules, that each one works when tested, that they are within service life, and documenting the result with dates and locations.

Nearby

Letting elsewhere close by? See: Westminster · Hammersmith and Fulham · Wandsworth · Brent · all of London

Tell us the postcode and what needs certifying; we'll handle the rest and keep the renewal on our calendar, not just yours. Tell us about the property

Sorting your Smoke & CO Alarm Check in Kensington and Chelsea?

Tell us the property and we'll confirm coverage and price by email before anything is committed.

Register interest

Register interest — Smoke & CO Alarm Check