Burnley · England
Gas Safety Certificate (CP12) in Burnley
One short form, and your Gas Safety Certificate (CP12) in Burnley is in hand — correctly registered professionals, honest pricing guidance, and your certificate stored with its renewal date.
Straight answer
Landlords in Burnley must have every gas appliance, flue and the associated pipework checked once a year by a Gas Safe registered engineer. The check produces the Landlord Gas Safety Record — the CP12 — which remains valid for 12 months.
Booking
What happens when you enquire
Live booking isn't switched on for Burnley yet — vetting comes before listing, in that order. Leave your details and you'll get a straight answer by email: whether we can cover the property, when, and for how much. No obligation either way.
Credentials
Who you're letting in
Anyone can print an invoice; only a Gas Safe registered engineer can issue a valid landlord gas safety record. That registration — and insurance to back the work — is our non-negotiable bar for professionals we book. The Gas Safe Register is publicly searchable, so you never have to take anyone's word for it, including ours.
Renting out in Burnley
Letting in Burnley: the practical points
For landlords in Burnley, the practical points are the universal ones: annual check, Gas Safe engineer, tenant copies on time. Keep the record where you can produce it quickly — for your agent, your insurer, or Burnley Borough Council if the property is licensed or ever inspected. Certificates that can't be found cause almost as much trouble as certificates that were never done.
The law
Why Gas Safety Certificate (CP12) matters for Burnley landlords
The duty comes from the Gas Safety (Installation and Use) Regulations 1998, which apply across Great Britain — Northern Ireland has parallel regulations to the same effect. Breaches are criminal offences prosecuted by the HSE, with fines that can be unlimited and imprisonment available for the worst cases. In England, a missing gas record can also invalidate a Section 21 notice, blocking possession until the paperwork is right.
Landlords must have every gas appliance and flue they provide checked by a Gas Safe registered engineer at least every 12 months, keep the record for two years, give tenants a copy within 28 days of the check, and give new tenants a copy before they move in.
Equivalent annual duty applies in Northern Ireland; engineers must be Gas Safe registered.
Penalties stated are statutory maximums or court-set; Burnley Borough Council is the local housing authority for Burnley.
The inspection
What the engineer actually checks
The inspection covers three layers: the supply (a tightness test from the meter), the appliances (combustion, pressure, safety devices, ventilation — tested with each appliance running), and the flues (visual condition plus confirmation that combustion gases discharge safely outside). An appliance the tenant owns isn't yours to certify, but pipework serving it is, and it stays in scope. The signed record closes the visit.
Pricing
What a CP12 costs
Two identical adverts can hide very different jobs — one boiler versus four appliances, ground-floor flat versus awkward loft access. That's why we show a guidance range rather than a headline teaser price, and confirm the real figure for your property before you commit. Bundling the annual boiler service into the same visit typically works out cheaper than booking it separately.
FAQ
Common questions about the Landlord Gas Safety Record (commonly called a CP12)
How long does a gas safety check take?
Typically around 30 to 60 minutes for a property with a boiler and one or two additional gas appliances. More appliances, or access issues, extend the visit.
What if my tenant refuses access for the gas check?
You must take all reasonable steps: written requests, offering alternative dates, and keeping evidence of each attempt. You may not force entry. A documented paper trail of reasonable attempts is what the HSE expects if access is ultimately refused.
What if an appliance fails the gas safety check?
The engineer records the defect and classifies how dangerous it is. Immediately dangerous appliances may be disconnected with your permission. You must have faults fixed by a Gas Safe engineer before the appliance is used again; the record itself lists the defects found.
Do tenants' own gas appliances need to be on my record?
Appliances owned by the tenant are not the landlord's responsibility to check, but the pipework serving them is, and any flue serving a tenant appliance that you own must be included. Note the division of responsibility in your tenancy agreement.
Is a gas safety check the same as a boiler service?
No. The safety check confirms appliances are safe to use; a service is a maintenance clean and inspection of the boiler itself. Many landlords in Burnley book both together because the engineer is already on site, but only the safety check is a legal requirement.
Nearby
Nearby coverage: Blackburn · all of Lancashire
Sort your Gas Safety Certificate (CP12) without the phone-tag: tell us about the property and we'll take it from there. Get availability by email
Sorting your Gas Safety Certificate (CP12) in Burnley?
Tell us the property and we'll confirm coverage and price by email before anything is committed.